Skip to content
A tidy white kitchen cupboard under a stainless steel sink, with a brass stop tap handle on the pipe in the back panel.

Plumbing in Kirkham: what to do when a pipe bursts

Turn the water off at the inside stop tap first, turning it clockwise. You will usually find it under the kitchen sink, but it can be in a downstairs toilet, a garage, a cellar or under the stairs.
By Ben Walsh
3 Nov 20262 min read

Turn the water off at the inside stop tap first, turning it clockwise. You will usually find it under the kitchen sink, but it can be in a downstairs toilet, a garage, a cellar or under the stairs. Turn it slowly and never force it, as too much force can damage it. If it will not turn, call a plumber.

If water may have reached the electrics, switch the power off at the fuse box. Do not touch any sockets or wiring that could be wet. Then look up at your ceilings. A bulge means water is pooling above, so keep clear of it in case it comes down.

With the stop tap off, flush the toilets and open the cold taps over the sinks and baths. That drains the water still sitting in the pipes. Turn off the central heating and any immersion heater, so nothing heats up while the system is empty. Soak up what you can with towels or buckets, and move furniture and belongings out of the wet area.

Acting fast keeps the damage to your ceilings, electrics and belongings as small as it can be. Keep the water off and ring me as soon as you can, so the pipe is repaired before it does more harm. At WS Gas Solutions I repair burst pipes across Kirkham, and you can read more on my Plumbing page. In the meantime, find your stop tap and check it works every six months.

Planning a job like this? Tell us what you need.

Written by

Ben Walsh

Owner