If the top of a radiator is cool or much colder than the bottom, it needs bleeding to let out trapped air. Switch the central heating off first and let the radiators cool down.
The bleed valve sits at the top and opens with a radiator key. Hold a cloth under it, then turn the key slowly anticlockwise until air hisses out. When water appears, turn it clockwise to close it. Bleeding several radiators can drop the pressure, so check the gauge and raise it as the maker's instructions say if it reads low.
Still cold? Take the cover off the thermostatic valve and check the pin moves up and down, as it can stick if the radiator has sat unused. If some radiators run warmer than others on the same setting, the system may need balancing. That is a job for an engineer, because adjusting the valves can cause leaks. A magnetic filter catches sludge to stop it causing problems, but a heavily blocked system needs a power flush first.
These checks need nothing more than a radiator key and a cloth, and a bled radiator warms from top to bottom again. If it still stays cold, or rooms heat unevenly, give me a call. I can balance the lockshield valves so the warmest radiators take less hot water and the heat spreads round the house. At WS Gas Solutions I work across Chorley, and here is how I handle central heating.


